Bring head-banging bass to your Polaris Slingshot with DS18’s SLG-RSUB10LD! Adding this durable 10” Subwoofer Enclosure into your Polaris Slingshot’s sound system will instantly increase the quality and feel of the bass response it reproduces.
The SLG Series was born out of the desire to elevate the driving experience for Slingshot owners worldwide. Our team of experts understood that the typical Slingshot audio setup often fell short in delivering the immersive sound quality that true audiophiles crave. Our team set out to create something that would seamlessly blend aesthetics, engineering, and cutting-edge technology to achieve an unparalleled audio experience in the Slingshot.
Fitted perfectly for rear storage compartments in all Polaris Slingshot models, when combined with all enclosures in our SLG series, the SLG-RSUB10LD reinforces an impenetrable soundstage designed to cut through the noise of the open road!
The high powered NXL-10SUB was built to bring the bass on your off-road, boat, or Slingshot to life. Designed with an IP65 marine-grade frame, this 10-inch subwoofer is guaranteed to deliver hard-hitting, bumbling bass that will stand up to the elements. Plus, its UV compliant cone and butyl rubber surround make it stable enough to withstand the open air design of the Slingshot. Not only does the NXL-10SUB bring the BOOM with its 300 watts RMS and 600 watts max power handling, it also features integrated RGB lights that can be connected to any RGB 4-wire circuit for a customizable ambiance that will match your mood or color scheme. (LED-BTC recommended)
Install this subwoofer enclosure into your Polaris Slingshot’s sound system seamlessly through use of the factory bolts and mounting location.
Upgrade your sound system today with DS18’s SLG-RSUB10LD and experience the ultimate in subwoofer performance.
Included:
- Loaded Subwoofer Enclosure (Fits driver or passenger side)
- x1 10" NXL-10SUB/BK
- LED RGB Lights*
- Mounting Hardware
- Water Resistant IP65
*LED BTC REQUIRED FOR LIGHTING FEATURES (SOLD SEPARATELY)
AMPLIFIER REQUIRED FOR POWERING THESE COMPONENTS (SOLD SEPARATELY)
Fits:
- 2015+ Polaris Slingshot
Specs:
SKU
SLG-RSUB10LD
Speaker Size
10" / 254mm
Total Impedance
4 Ohm
Total RMS Power Handling
300W
Total MAX Power Handling
600W
Sensitivity (1w/1m)
89dB
Frequency Response
35-250Hz
Recommended Lo Pass Crossover
100Hz
Speaker Specifications:
Voice Coil Diameter
2" / 50.8mm
Voice Coil Former Material
Glass fiber
Winding Material
CCAW
Cone Material
Injection Molded Polypropylene + UV Compliant
Dust Cap Material
PPI
Surround Material
Butyl (Rubber)
Basket Material
High Temp Injection Molded Composite (ASA) with UV Protection coating
Magnet Material
Ferrite
Magnet Weight
72oz
Enclosure Specifications:
Internal Volume
0.75 ft3 / 21L
Load Configuration
Single
Box Type
Ported / Vented
Port Tuned (Fb)
40Hz
Box Material
Polyethylene (PE)
Finish Material
Black
-3Db Dropping Point (F3)
45Hz
UV Protection
Yes
Waterproof Rating
IP65